Quick review of HRA California Common...

So I'm 2/3 of the way through the first keg of the California Common posted here. And I figured I would update on how it came out... something I rarely do. This may be the best "to style" beer I have made... Crystal clear, I attribute to doing my first protein rest which I will be utilizing more in the future due to these results. Hop profile is great, though this is only a single hop beer, I think the use of first wort hops discussed here, gives a nice profile of everything the Northern Brewer hops have to offer... even though this fermented all the way down to 1.009, there is surprising body and balance to the hops, maybe this has to do with the protein rest as well? Head retention is good with some nice lacing... overall a very drinkable beer that profiles the hops nicely while not overpowering those not into IPA's... at least judging from the how much my brother-in-law enjoys it (and he dislikes IPA's)...

The second keg is naturally carbonated and is destined for my best friend's bachelor party... which is kind of a bummer because I selfishly want to keep it all for myself, but it will be nice to see how the "public" reacts to it...

Also, side note... Black Fri.P.A. is finally kicked... thank god. That underwhelming beer has been taking up valuable real estate in my kegerator for like 4 months... now I can keg and carb the India Pilsner Ale (also for bachelor party) and cold crash the second keg of California Common.

That's it for now... sorry no pics... my droid's camera has been acting funny lately... Later.

Overdue Update and India Pilsner Ale Brewday...

I know... I know... it's been forever since I posted... sry.

Just to bring you up to date:

Black Fri.P.A. posted here and here... is still on tap...

Things I learned about black IPAs:

1. If I brew this in the future, more hops... especially aroma and dryhop... this came out more like a hoppy porter than anything IPA-ish.

2. Black IPA is kind of a novelty style... and ten gallons of black IPA is a lot. I get tired of the style quickly... If not for all the commercial bottles and wine I've been drinking to change things up, I might have ended up dumping or pulling the second keg out of the kegerator and sticking it in the corner for a few months... hence the reason that it's still on tap almost 3 months later.

California Common (aka Steam beer) posted here... is kegged and carbonating. To be honest I kinda forgot about this one while it was ferementing at 55 degrees, 8 weeks in primary and it finished at 1.009 from 1.054 which is kinda low for the style, but it was crystal clear and the gravity sample tasted great. I'm currently force carbonating one keg in my kegerator and I primed the other to naturally carbonate at ambient temps...

Cellar Party: A couple weeks ago, myself and a few of my beer geek friends got together and all brought old and/or rare bottles for a tasting party...

Over 150$ worth of beer, oldest bottle was from 2005... Among the beers tasted that night: New England Brewing Co. Imperial Stout Trooper (2011), Deschutes The Abyss (2007), Berkshire Brewing Co. Russian Imperial Stout (2011?), Rodenbach Vintage Oak Aged Ale Barrel No. 230 (2007), Brooklyn Brewery Black Ops (2011), DFH Noble Rot (2011), Coastal Extreme brewing Co. Newport Storm Barleywine (2005), Oskar Blues Ten Fidy (2011?), Laughing Dog Brewery The Dogfather (year?), DFH Olde School (2010), Alchemist Beer Heady Topper (one of the best IIPA's I've ever had...), Sierra Nevada Hoptimum (2012)

Good friends, tons of great beer... a great time was had by all... and I earned like 4 badges on Untappd. Great, great night.

India Pilsner Ale Brewday: About a year ago, at a local brewpub I had this great IPA made with all pilsner malt... it was hazy, super pale, and had a great floral and citrus hop profile. The brewmaster himself was kind enough to share the ingredients and target gravity with me, though he left weights and times up to me to figure out... I brewed a 5 gallon batch of this last year (before I started this blog) and it turned out great, one of my favorite homebrews to date. last Sunday I brewed up a ten gallon batch an it's currently fermenting in my closet at 65 degrees (my basement is still too cold for Ales...)

Here's the recap...

Recipe for 11 gallons:
26lbs German Pilsner Malt (I used Belgian last time but my brewstore was out)

Single infusion mash at 154 degrees (nailed strike temp this time.)

Double batch sparge, actually, doing a kinda combination batch/fly sparge now... my ten gallon igloo cooler won't fit enough water for a single batch sparge, so I dump in sparge water until the cooler is brimming, let sit about ten minutes and start draining... as it drains, i slowly add remaining sparge water to maintain full level... then let drain completely before repeating for second sparge.

90 minute boil (pilsner malt contains a lot of DMS, which will add a buttery creamed corn flavor... so the longer boil makes sure to drive all that out.)

start hop schedule with 60 minutes left in the boil...
60 minutes: 1.5oz Summit hops for bittering
30 minutes: 1oz of Cascade and 1oz of Centennial hops for flavoring
5 minutes: 1oz of Cascade and 1oz of Centennial hops for Aroma
Dryhop: each fermentor for 1 week with 1oz of Cascade and 1oz of Centennial hops for Aroma

I didn't bother with Whirlfloc, with all that Pilsner Malt and no protein rest, there is no way this is going to clear anyway...

US-05 dry yeast... I tend to use clean simple dry yeast for hop and malt centric beers, I save the expensive liquid yeasts for Belgians and Steam Beer where the yeast is a major contributor flavor...

This brewday was a breeze... I'm really getting my ten gallon process down... total zen mode even though life is full of turmoil at the moment. Actually that's what I really love about brewing... aside from having a ready supply of good beer on tap in my own home, it's the actual process that I love. No matter what is going on in my life, no matter what I'm stressing or obsessing about, work... kids... whatever... it all goes away when I'm brewing, it really is like 6-8 hours of meditation for me. I feel physically exhausted (in a good way) and mentally recharged after a quiet brewday.

However, I did hit a few snags... My target gravity was 11 gallons at 1.070 gravity and I usually get 83%  efficiency... I ended up with 12 gallons at 1.054 giving me 71% efficiency... I didn't get the boil off rate I was expecting so it ended up a little watered down, not sure why efficiency was so low (for me... I am aware that this is a perfectly acceptable efficiency for most All Grain brewers) it's nbd... the finished beer will just be lower alcohol, maybe a little less body, and hoppier... but hoppy is good, so...

To finish off... A wise man from my past once told me, "Life happens." Well, I am in the midst of a lot of personal turmoil and change... unfortunately some of those changes may affect the frequency of my brewing... hoping to do my best to brew when I can because brewing soothes my soul. But I will try to keep up on the blog when I can... thinking of doing some reviews of commercial brews... local brewpubs.. stuff like that...

Actually, if any commercial breweries out there would like me to blog reviews of their beers, I would be happy to oblige for a free sample or two... I did this for Bison Brewing Co., posted here... My contact info can be found on my profile... just throwing it out there...

Sorry no lolz... not feeling lolzy... self reflection is where it's at right now. That's it for today... I'll be around... Later.

California Common Brewday (In Over My Head and Total Cagematch)

So after the troubles with fermentation temps in my basement, I decided to brew something that would that would be ideal for the cold winter temps..

I had a year old sample of Wyeast 2112 (a lager yeast that thrives from 58 to 68 degrees) sitting in the fridge for almost a year. I successfully built up the sample with two steps of starters giving me enough yeast to pitch into a 10 gallon batch. So, given the fact that my basement was 58 degrees, and I happened to have just the right yeast sitting around, I decided to brew a California Common. (Think Anchor's Steam Beer)

I have brewed this style before (it was even my first extract brew) but I decided to start from scratch on the recipe, just so I could call it my own... First I'll give you the ingredients of the recipe, disclaimer: I typically get 83-ish % efficiency, you may need to adjust to your own efficiency.

For 11 gallon batch:

17 lbs 2row

2.5 lbs Crystal 60L

60 minute boil:

1.75 oz Northern Brewer pellet hops 12.3% AA FWH

1 oz Northern Brewer whole leaf hops9.2% AA 20min

1 tablet Whirlfloc 20min

1 oz Northern Brewer whole leaf hops 9.2% AA 5min

0.25 oz Northern Brewer pellet hops 12.3% AA 5min

First of all, I got a grain mill for Christmas... I was excited to use it for the first time, but I get such great efficiency from the crush at my brewstore, I was a little worried about not crushing fine enough and getting poor efficiency or crushing too fine and getting a stuck sparge. Actually this was the one part of the brewday that went perfectly... my normal high efficiency and no signs of a stuck sparge.

A tip I read on the message boards, I used a credit card to measure the gap on the rollers of my grain mill. I then ran a little bit of grain through and made small adjustments until I liked the look of the crush.

New mill ready to go, full hopper and drill hooked up to drive shaft to make milling faster and easier...

Close up view of the resulting crush, really happy with results. I think I will probably never mess with the settings again...

Normally with All Grain using a cooler for the Mash Tun, you would mix a measured amount of hot water at a certain temp with your grain and hope to hit your conversion rest temp (like 154 degrees) and then leave it there foe 60 minutes while conversion takes place. But... you can make it more complicated... You can do what's called a step mash. A simple example for a step mash would be to mash in at 133 degrees for the protein rest (protein rest can add body and clarity) and let it rest for 20 or so minutes, then raise the temp to your normal conversion rest (154 in this case), rest for an hour, then mash out and continue per usual.

There are a few ways to raise that temp, I'll only talk about those using a cooler where adding external heat with a burner is not an option (bc that's how I roll)... 

For a simple step mash you would mash in to 133 with a very thick mash (I like 1.125 quarts of water per pound of grain) let it rest, then calculate how much boiling water (212 degrees obv) to add to bring it up to your target temp. Add that, stir it in, hit your conversion temp, and proceed with your normal process...

Also, there is a method called decoction... Mash in to 133 for your protein rest, with a normal grist to water ratio (say 1.5qt to 1lb grain) let rest, scoop out a measured amount of the mash (more grist than water) heat to conversion rest temp, let it rest a short period, then heat to boiling temp. Return decoction to main mash and this should bring the total mash temp up to your conversion temp...

I had never done either before this batch... I was going big and trying the decoction method, but did it work out?? not so much... 

I mashed in at 1.125 qt/lb and hit my 133 degree protein rest. I let it rest 10 minutes while I pulled my decoction. Following the advice of my local brewstore, I used a colander to pull the decoction to keep it as dry as possible... I pulled 8 qts of grain and started heating over a low flame on my smaller turkey fryer while stirring constantly. Here were my issues in numbered list format:

1. due to dryness of grist, no matter how much I stirred, I could not get consistent temp readings...

2. no matter how much I stirred, the grist burned to the bottom of the pot. I think even the low flame was too hot... next time I'll do it on the stove.

3. when I thought I had most of the grist up to 212 degrees I added it back to the mash (leaving behind the burnt stuff) and it only brought my main mash temp up 2 degrees. Conversion will NOT happen at 135 degrees.

So... because I mashed in on the dry side I was able to add boiling water to the mash to bring up the temp, I hit 152 and let it rest for conversion. The downside of this, was that I had not calculated the additional strike water, so I had to compensate by reducing sparge water so I would still hit my desired preboil volume...

After that mess... I proceed with mash out (including First Wort Hops (discussed in Black Fri.P.A. Brewday)), sparge, boil with all hop additions as listed... Normally I use hop pellets because they are easy, but my brewstore only had 2 oz of Northern Brewer in pellets and I had to take the rest in whole leaf... Never. Freaking. Again. After chilling, I started to drain the keggle into the fermentors... The whole hops clogged it immediately. I tried using the siphon action of lifting the drain hose up to back flow and loosen things up... fail. I tried stirring things up with my brewing ladle while trying to drain... also fail. I tried washing and sanitizing my arm and reaching in to loosen things up... also also fail. I tried to use my autosiphon to siphon out of the keggle and into the fermentor, that clogged too... also also also fail. I ended up having to literally ladle 11 gallons of wort from the keggle to the fermentors... at least it was well aerated... So I had chilled all the way down to 60 degrees (I usually call it good at 70), this yeast likes it cold... 

This brewday was a slugfest from beginning to end, but I think I came out the winner...I took gravity reading: 1.054, 81% efficiency, IBUs (international bittering units) calculated at 52.5, and color calculates at 10 degrees SRM... All that means is, so far, (I think) I have hit all the specs for the California Common style dead on. And with the long protein rest, whirlfloc, and high flocculation of the yeast strain, this should get super clear. And as a bonus, I picked up no hint of the burned grist in the gravity sample, though I'm keeping my fingers crossed for the final product...

Drinking my Black Fri.P.A tonight, which is fiiiinaly on tap after 8 weeks of slow fermentation. pretty happy with it, wishing for more hop aroma, thinking maybe of dryhopping in second keg, we'll see.

That's it for now... my hands are cramping, and if you read this far, I'm sure you've had enough... Later!

Managing Fermentation... Lesson Learned.

So it's been 5 weeks since the Black Fri.P.A. brewday and it's still sitting in the fermentors waiting to be dryhopped. Normally this would mean I was just being lazy and hadn't gotten around to kegging... but this time I have been watching it closely and it's just not done. 5 weeks! Primary fermentation should have taken a week, two at the most... What the heck?! SPOILER ALERT! The main issue here is temperature... Here's how it played out...

11/26 Brewday, split batch into two fermentors pitched 1 packet of US-05 dry yeast into each fermentor. Basement is about 65 degrees, perfect temperature for fermenting a nice clean American IPA (in this case Black IPA) LCD thermometer on side of fermentor is reading 70 through the first few days of active fermentation.

Over the next 3 weeks, as winter creeps in, temp in basement where the fermentors are located slowly drops to around 55. LCD thermometer slowly drops to ambient temp and I assume fermentation is done. I follow my long primary rule and do not touch for three full weeks.

After 3 weeks is up, I take a gravity reading to see where it finished at. I'm expecting it to be low (like 1.010), because I mashed low (147 degrees). But surprise! 1.020! after 3 weeks... What you got there is a stuck fermentation... With extract brewing, this can be expected, I never had an extract beer finish lower than 1.020. But with All Grain, I have never had one finish higher than 1.014... Now, if I was bottling this would be a major issue. If I were to bottle before fermentation was complete, it could start up again spontaneously. The yeast consuming those residual sugars would build up enough pressure in the sealed glass bottles that they would explode. And if you are married, there's no better way to end your homebrewing career than to have a closet full of beer bottles exploding and making a huge mess...

But I keg... so it's not really that big of a deal. If fermentation starts up again, the worst that could happen is the beer will get overcarbonated, and I can fix that by bleeding off pressure and letting it sit. My concern is the taste. An IPA is supposed to be crisp, dry, and bitter... At 1.020 there are enough sugars left that it tastes just a little too sweet. So I would like it to finish lower, ideally under 1.014 IMO...

So I took some action, nothing drastic, I didn't pitch more yeast (yet)... I moved the fermentors upstairs where the temp is a little warmer (65 degrees (I'm cheap, ok? No judge...)) and I gave the buckets a swirl to try and rouse the yeast.

After moving and swirling, I left them alone for another two weeks... I peeked today, there was a thin layer of foam on the surface of each... it looks like both are still in an active (but very slow) fermentation. I took a gravity reading and the left one was at 1.018, and the right 1.014... Come on! 5 weeks! 

But I'm just gonna be patient (lazy) and test them in another week. If gravity readings are unchanged in a week, I will consider more drastic measures... (repitching yeast and putting in a warm bath) Stay Tuned...

So how can this issue be avoided? The easiest way is to choose your style based on the current or upcoming conditions... In the summer when it's consistently 80 degrees, you don't kill yourself trying to keep fermentation temps low on your American Pale Ale, brew a Saison or a Belgian style that uses a strain of yeast that likes the warm temps. Conversely, when your basement is 55 degrees in the winter, you can start thinking about Lagers... ok, maybe 55 is too high for lagers... But! Ever had an Anchor Steam Beer? I have, and I totally love it... Steam Beer is this old style of lager from gold rush California era. This style uses a unique Lager strain of yeast that is OK fermenting at the low end of Ale temperatures. Not many breweries still make this style. Anchor Brewing out of San Francisco is considered the standard of the style. And it's delicious... think American Pale Ale, but with more fruity esters and instead of citrusy hops, they are earthy and woodsy... mmmm...

So can you guess what I'm planning for my next brewday? Also, that kinda leads into the other brewing related thing I did today... I brewed a California Common (Official name of the Steam Beer style) last January and right before the keg kicked, I filled a few bottles with my beer gun. Well the keg kicked on the fourth bottle and I ended up with 3/4 of a bottle with 2 inches of Wyeast 2112 yeast on the bottom. Instead of dumping it, I sealed it up and stuck it in the back of the fridge and forgot about it. 

I took it out and opened it the other day... It was crystal clear and still had plenty of carbonation despite being filled off the keg and having a ton of headspace. I poured off the beer leaving the 2 inches of yeast sludge in the bottle. It was delicious... no sign of infection after a year, so I sealed up the bottle of yeast again and stuck it back in the fridge. Today I decided to make a starter with it. 

Growler I'm using to make the starter on the left, grolsch bottle containing year old yeast slurry on the right.

I probably won't be brewing for 2 weeks, so if it works, I have time to build it up a few times with progressively bigger starters so that I have plenty of yeast for a 10 gallon batch. Reusing this yeast will cut $8 off the cost of brewday... And if it doesn't work, nbd I can buy some fresh yeast and all I've lost is 3/4 cup of dry extract. While this isn't cutting edge, it's a fun experiment for me. Stay tuned for that also...

That's it for tonight, Later...

Edit: Apparent active fermentation on the Wyeast 2112 experimental (to me) starter... 3/4 inch krausen and smells like fresh bread dough... good signs!